2 Slot 3u Vpx Chassis

Posted : admin On 4/12/2022

And development purposes. It includes a front load 3U 2-slot 1' pitch air-cooled card cage, a rear 3U 2-slot 1' pitch rear transition module card cage, and a 2-slot custom 3U OpenVPX backplane, compliant to OpenVPX Backplane Profile BKP3-DIS02-15.2.8-2. The chassis can be powered by an external ATX type power supply using a standard ATX type. Designed for 3U VPX and SOSA aligned modules, the AoC3U-410 is a 4 slot ATR chassis featuring dual removable high capacity drive bays. The conduction cooled chassis includes forced air cooling to widely available VITA 48.2. A VMEbus slot is limited to a maximum of 90 watts at 5 volts. VPX raises this to 115 watts at the same voltage, or up to 384 watts at 12 volts or 768 watts at 48 volts. The specification of 6U VPX calls for computer cooling via a conduction-cooled envelope compliant with the IEEE standard IEEE-1101.2.

Products > HAWK VPX 3U 1 Slot Chassis

PCI-Systems innovative 1-2-3 system. 1: Lab unit 2: Configure unit 3: Deploy unit!
All our prototype systems can be deployed without needing to change out the chassis. Add front and rear custom covers, MIL-DTL mezzanine and full sealing and you are ready to go to qualification!

Now available as rugged low cost INTEL I7 enclosure. See below.

OVERVIEW

Featuring large heatsink areas and a fully customizable backplane our HAWK can be configured to meet many special single or double slot payload demands. Available as a lab version for the LN-1000 in the single slot version.

Combined with our IGUANA OpenVPX 3U switch module or Juniper Networks LN-1000 rugged router the HAWK is a very small but fully ruggedized networking platform. Combined with our 3U VPX Intel I7 CPU module it can be configured to meet various demands. Ask for block diagrams of standard variants!

I/O can be configured to 2x 55 pin MIL-DTL connectors plus a power connector, power switch and GORE brand vent.

Technology Overview

- Aluminum

- NEMA 4x IP65 sealing

- GORE Vents for atmospheric pressure equalization

- MIL-DTL-38999 connectors

- Rugged On/Off switch

- IPC class 3

- Distributed PCIe100 MHz clock where applicable

- Passive backplane with active mezzanine(PATENT PENDING)

- Custom mezzanine for most OpenVPX slot profiles

Single Slot Enclosure with Intel I7

This product is a rugged turn-key Intel CPU solution. The system is modular in nature to accomodate future processor upgrades easily or to reconfigure the system for a new project.

4th Gen. Intel Core I
Intel Core i7 4700EQ
Intel Core i5 4402E

Chipset: Intel® QM87
Graphic: Intel® HD Graphics 4600
Operating System: Windows® 8, Windows® 7, WE8S, WES7, Linux, VxWorks

DRAM: SO-DIMM DDR3L@1.35V up to 1600MT/s and 16GByte
Chipset: Intel® QM87
Ethernet: Intel® I218-LM GbE LAN Controller with AMT 9.0 support
I/O Interfaces on rear I/O:
1x 10/100/1000 Ethernet Base-T
1 x PCI Express™ (optional)
2 x SATA
1 x USB 3.0
4 x USB 2.0
LPC bus
I²C bus
1 x PEG
Sound: Digital High Definition Audio Interface with support for multiple audio codecs
Graphics: Next Generation Intel® HD Graphics
with OpenCL 1.2, OpenGL 4.0 and DirectX11.1 support; up to three independent displays: HDMI 1.4, DVI, DP, VGA
Video out: HDMI, VGA (Optional)

ORDERING INFORMATION:

PCI_900.627 -- Chassis, standard backplane, PSU, choice of CPU or network centric rear I/O
PCI_500.830.28VDC -- Single Slot enclosure with I7 COMe rugged INTEL I7 28VDC
PCI_500.835.115-220AC -- Single Slot enclosure with I7 COMe rugged INTEL I7 115-220AC

For technical specifications please ask your representative for the DATA SHEET or fill out the request form here.

The WILD100 7-Slot 3U OpenVPX SOSA-Aligned Chassis (WC3170) is a COTS benchtop 3U VPX Chassis and Backplane that was specifically designed to economically speed development of SOSA-aligned 100Gb Ethernet boards and systems.

It is VITA 65 compliant, SOSA-aligned, and designed and built in USA.

Vpx Backplane Chassis

Need more capability? See the WILD100 13-Slot 3U OpenVPX Chassis (WC31D0).

The 100GbE SOSA-Aligned Chassis includes a Chassis, Backplane, and secure Chassis Manager. Optional FPGA Boards, Switch, Storage, SBC, VITA blocks and cables are also available.

The 7-slot air-cooled Chassis and Backplane incorporates slots for up to four conduction-cooled 3U VPX Payload Boards, plus a 100GbE Switch, SBC, and VITA 62 power supply, delivering up to 700W.

The Chassis Manager is VITA 46.11/SOSA-aligned and utilizes a Xilinx UltraScale+ ZU5EG MPSoC.

See all of the Annapolis Chassis and Backplanes.

Chassis and Backplane

SOSA-aligned
Front-loading, air-cooled Chassis with conduction-cooled slots
7 3U OpenVPX Slots
- 4 Payload Slots
- 1 SBC Slot
- 1 40/100GbE Switch Slot
- 1 VITA 62 Power Supply Slot – Standard or 12V-Heavy
Input power is 28VDC per MIL-STD-704F
25 Gbps Line Rates on Data and Expansion Planes
- 25/40/100Gb Ethernet
- SDR/DDR/QDR/EDR Infiniband
- Gen 3/4 PCI Express
- Custom protocols up to 25Gbps per lane
SOSA-aligned Backplane profiles
- Payload Profile: SLT3-PAY-1F1U1S1S1U1U2F1H-14.6.11-n
- Payload Profile: SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16
- Switch Profile: SLT3-SWH-6F1U7U-14.4.14
VITA 66.5C and VITA 67.3C for payload slots
Integrated ultra-low skew AUXCLK/REFCLK radial distribution
Chassis manager connector handles JTAG, maintenance ports (UARTs) and control
Up to 4 MIL-DTL-38999 SOSA-aligned circular connectors with 19 RF connections – one for each payload slot
LED Status Indicators

Chassis Manager

SOSA-aligned and VITA 46.11 compliant
Xilinx UltraScale+ ZU5EG MPSoC running Linux for CHmC
- Processing Subsystem (PS)
  - Quad core A53 ARM running at 1.2 GHz
  - Dual core R5 ARM
  - 4GB DDR4 DRAM
  - 128MB QSPI NOR
- Programmable Logic subsystem (PL)
  - 256K System Logic cells in Programmable Logic
  - 18Mb of UltraRAM
  - 128MB QSPI NOR
  - Dual 128KB battery backed NV SRAM
Integrated JTAG access/control from chassis manager to each slot
- External JTAG connection with SW selectable multiplexing from each slot
- Xilinx JTAG over ethernet via Chassis Manager

Application Development